Setting new standards for performance and economy
The FilmTec™ portfolio consists of separation-technology products that are highly effective in industrial, municipal, commercial, and consumer water applications.
The new FilmTec™ Prime RO brackish water reverse osmosis elements boost performance to a prime level while reaching an unparallel sustainability impact. Achieve reduced energy by up to 20% while improving the permeate quality by up to 60% with the new brackish water reverses osmosis elements for industrial applications.
Leveraging proven and highly effective technologies, such as reverse osmosis (RO) and nanofiltration (NF), FilmTec™ products reject more dissolved solids and organics, and use less energy to produce permeate, than typical elements.
From use in brackish water purification to specialty separations, elements in the FilmTec™ portfolio achieve high, yet cost-effective, performance through their ability to:
- Tolerate a wide range of operating conditions.
- Operate very efficiently at lower pressures.
- Maintain excellent structural and pH stability.
- Resist bacterial growth.
- Produce excellent membrane flux and salt rejection.
Designed to treat challenging waters and achieve specialty separations
From separating salts, solids, and other substances from water to producing ultrapure water, the FilmTec™ portfolio helps solve a variety of today’s difficult water-treatment needs.
Process Water Treatment
Ultrapure Water
Municipal Water
Commercial Water
Home Drinking Water
Greater salt rejection and higher productivity
FilmTec™ reverse osmosis membrane elements are very effective at industrial process water treatment. In many industrial systems, RO elements also serve as pretreatment for ion exchange (IX) resin beds. Because of its exceptional properties, FilmTec™ technology can help lower capital investment, reduce operating costs, and allow for greater flexibility for future system expansion.
Portfolio elements that work well for process water treatment include:
- FilmTec™ brackish water elements, which have an unsurpassed high-active membrane surface area that produces 99.5 percent or greater typical salt rejection performance.
- FilmTec™ low-energy brackish water elements, which are designed specifically to meet emerging demand for lower-pressure RO system operation; these elements help reduce operating expense without sacrificing salt rejection or high productivity.
- FilmTec™ reverse osmosis membrane elements that are installed before ion exchange beds, which help reduce demineralizer operating costs dramatically; pretreating water for boiler makeup with these elements removes silica, dissolved solids, and total organic carbon (TOC), extending the life of the resins and lowering chemical regeneration usage, waste handling, and maintenance costs.
- FilmTec™ reverse osmosis membrane elements that are used in double-pass RO systems, which produce high-purity water in a continuous process; for applications with less stringent water-purity requirements, these elements can be used cost-effectively in single-pass RO systems as well.
Precision fabrication for the ultimate in quality
Fabricated in our ISO 9002 certified facility, FilmTec™ reverse osmosis membrane elements are produced using the industry’s most advanced precision manufacturing technology. With high-quality raw materials,
these elements help achieve high strength, durability, and consistency.
We thoroughly test our elements to ensure that they provide predictable, trouble-free operation. Our quality control process includes visual and vacuum testing of glue lines and wet testing to confirm rejection and flow performance.
As a result, FilmTec™ elements exhibit very few element-to-element differences. Each of our wet elements is packaged with a storage solution in an oxygen barrier bag before shipment to minimize the chance of biological contamination.
We assure the quality and performance of FilmTec™ elements with a robust three-year limited warranty and extensive service and support.
Our FilmTec™ portfolio of reverse osmosis and nanofiltration solutions is globally recognized as the industry leader in separation and purification technology.
FilmTec™ Aqualast™ 1812-HR
FilmTec™ Tap Water Reverse Osmosis Elements feature advanced membrane technology and offer outstanding reliability and consistency. Our automated fabrication process allows precise production of every element to tight, pre-defined specifications, helping customers develop and maintain brand recognition along with a reputation for building systems that reliably provide low-impurity drinking water.
FilmTec™ BW30 PRO-365
FilmTec™ BW30 PRO-365 is a high rejection and high performance industry-standard brackish water reverse osmosis membrane element.
FilmTec™ BW30 PRO-400
FilmTec™ BW30 PRO-400 is a high rejection and high performance industry-standard brackish water reverse osmosis membrane element.
FilmTec™ BW30 PRO-400/34
FilmTec™ BW30 PRO-400/34 is a high rejection and high performance industry-standard brackish water reverse osmosis membrane element.
FilmTec™ BW30 PRO-400/34i
FilmTec™ BW30 PRO-400/34 is a high rejection and high performance industry-standard brackish water reverse osmosis membrane element that includes iLEC™ interlocking end caps.
FilmTec™ BW30 PRO-4040
FilmTec™ BW30 PRO-4040 elements are an industry standard for reliable operation and production of high quality water in light industrial and drinking water applications.
FilmTec™ BW30HR-440
FilmTec™ BW30HR-440 Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment waters and seeking consistency, high performance, long element life, increase productivity, higher water quality coupled with excellent fouling resistance and reduced footprint installations.
FilmTec™ BW30HR-440i
FilmTec™ BW30HR-440i Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment waters and seeking consistency, high performance, long element life, increase productivity, higher water quality coupled with outstanding fouling resistance and reduced footprint installations.
FilmTec™ BW30HRLE-440
FilmTec™ BW30HRLE-440 Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment waters and seeking advanced membrane treatment with good water purity and low energy consumption.
FilmTec™ BW30HRLE-440i
FilmTec™ BW30HRLE-440i Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment waters and seeking advanced membrane treatment with good water purity and low energy consumption.
FilmTec™ BW30XFRLE-400/34
FilmTec™ BW30XFRLE-400/34 Elements are ideal for reverse osmosis plant managers and operators dealing with challenging waters and wastewaters who are seeking an advanced membrane treatment with good water purity, improved fouling resistance and low energy consumption.
FilmTec™ BW30XFRLE-400/34i
FilmTec™ BW30XFRLE-400/34i Elements are ideal for reverse osmosis plant managers and operators dealing with challenging waters and wastewaters who are seeking an advanced membrane treatment with good water purity, improved fouling resistance and low energy consumption.
FilmTec™ BW30XHR PRO-400/34
FilmTec™ BW30XHR PRO-400/34 is an extra high rejection brackish water reverse osmosis membrane element. Learn more.
FilmTec™ BW30XHR PRO-400/34i
FilmTec™ BW30XHR PRO-400/34i is an extra high rejection brackish water reverse osmosis membrane element that includes iLEC™ interlocking end caps.
FilmTec™ BW30XHR PRO-440
FilmTec™ BW30XHR PRO-440 is an extra high rejection brackish water reverse osmosis membrane element.
FilmTec™ Eco Platinum-440
FilmTec™ Eco Platinum-440 Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment waters who are looking for a state-of-the-art solution to tackle tough CAPEX and OPEX challenges.
FilmTec™ Eco Platinum-440i
FilmTec™ Eco Platinum-440i Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment waters who are looking for a state-of-the-art solution to tackle tough CAPEX and OPEX challenges.
FilmTec™ Eco Pro-400
FilmTec™ Eco Pro-400 Elements are ideal for reverse osmosis plant managers and operators dealing with challenging waters who are looking for a state-of-the-art solution to tackle tough CAPEX and OPEX challenges.
FilmTec™ Eco Pro-400i
FilmTec™ Eco Pro-400i Elements are ideal for reverse osmosis plant managers and operators dealing with challenging waters who are looking for a state-of-the-art solution to tackle tough CAPEX and OPEX challenges.
FilmTec™ Eco Pro-440
FilmTec™ Eco Pro-440 Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment waters who are looking for a state-of-the-art solution to tackle tough CAPEX and OPEX challenges.
FilmTec™ Eco Pro-440i
FilmTec™ Eco Pro-440i Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment waters and seeking advanced membrane treatment with high water purity and low energy consumption.
FilmTec™ HSRO-390-FF
FilmTec™ HSRO-390-FF elements deliver high purity water with added capability to withstand sanitization under high temperature. This reduces the usage of chemical sanitizers and saves operating costs of sterile water for injection and dialysis customers.
FilmTec™ HSRO-4040-FF
FilmTec™ HSRO-4040-FF elements deliver high purity water with added capability to withstand sanitization with hot water. This reduces the usage of chemical sanitizers and saves operating costs of dairy, sterile water for injection, and dialysis customers.
FilmTec™ HSRO-4118-FF
FilmTec™ HSRO-4118-FF elements are heat-sanitizable reverse osmosis elements for applications such as home dialysis systems.
FilmTec™ Hypershell™ HSRO-390-FF
FilmTec™ Hypershell™ HSRO-390-FF elements deliver high purity water with added capability to withstand sanitization under high temperature for dairy and sterile water for injection applications. The rugged outer shell is easy to handle, enabling safer and faster loading and removal of elements from a system.
FilmTec™ Hypershell™ HTRO-4040/48 and HTRO-8038/48 High Temperature Reverse Osmosis Elements
FilmTec™ Hypershell™ HTRO-4040/48 and HTRO 8038/48 High Temperature Reverse Osmosis Elements offer up to 80°C continuous operating temperature capability due to a special element design and a FilmTec™ SW30 flat sheet, ideally suited for various kinds of hot industrial streams with high demand of solute rejection. Our Hypershell™ technology, a machined polypropylene rigid outer shell, offers significant advantages versus standard mesh wrapped elements like minimizing channeling, improving the hydrodynamics of the element, energy savings and faster loading and unloading of elements.
FilmTec™ Hypershell™ NF-390-FF
FilmTec™ Hypershell™ NF-390-FF Elements can be used by food and dairy processors for a variety of desalting, purification, and other separations. This element contains an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing a variable degree of monovalent salts depending upon the composition of the process stream.
FilmTec™ Hypershell™ NF-8038-FF
FilmTec™ Hypershell™ NF-8038-FF Elements contain an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing a variable degree of monovalent salts depending upon the composition of the process stream. It is designed to withstand rigorous processing applications and conditions, and minimizes dead flow areas and element bypass.
FilmTec™ Hypershell™ NF245-3838/48-FF
FilmTec™ Hypershell™ NF245-3838/48-FF Elements contain an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing a variable degree of monovalent salts depending upon the composition of the process stream. The thick 48-mil feed spacer is ideal for high viscous feed streams. These elements are especially effective in dewatering and desalting or product concentration.
FilmTec™ Hypershell™ NF245-390-FF
FilmTec™ Hypershell™ NF245-390-FF Elements can be used by food and dairy processors for a variety of desalting, purification, and other separations. This element contains an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing a variable degree of monovalent salts depending upon the composition of the process stream.
FilmTec™ Hypershell™ NF245-8038-FF
FilmTec™ Hypershell™ NF245-8038-FF Elements contain an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing monovalent salts. It is designed to withstand rigorous processing applications and conditions, and minimizes dead flow areas and element bypass.
FilmTec™ Hypershell™ NF245-8038/48-FF
FilmTec™ Hypershell™ NF-8038/48-FF Elements contain an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing a variable degree of monovalent salts depending upon the composition of the process stream. The thick 48-mil feed spacer is ideal for high viscous feed streams. These elements are especially effective in dewatering and desalting or product concentration.
FilmTec™ Hypershell™ NF245N-8038/48-FF and NF245N-3838/48-FF Nanofiltration Elements
FilmTec™ Hypershell™ NF245N-8038/48-FF and NF245N-3838/48-FF Nanofiltration Elements offer a unique combination of features that are typically needed for use in food, fermentation, beverage and nutrition applications.
FilmTec™ Hypershell™ NF245XD
FilmTec™ Hypershell™ NF245XD elements help enable long-lasting separation and demineralization from milk and whey streams that maximize operational efficiency.
FilmTec™ Hypershell™ RO-390-FF
FilmTec™ Hypershell™ RO-390-FF Elements are the premier membrane for evaporator condensate polishing. With more active area than competitive elements, FilmTec™ Hypershell™ RO-390-FF can maximize performance and reduce capital cost by requiring the fewest elements for polishing applications.
FilmTec™ Hypershell™ RO-8038
FilmTec™ Hypershell™ RO-8038 Elements contain a high-rejection reverse osmosis membrane that has successfully been used to process a wide range of food and dairy streams. These elements are especially effective in dewatering or product concentration.
FilmTec™ Hypershell™ RO-8038/48
FilmTec™ Hypershell™ RO-8038/48 Elements contain a high-rejection reverse osmosis membrane that has successfully been used to process a wide range of food and dairy streams. The thick 48-mil feed spacer is ideal for feed streams with higher solids. These elements are especially effective in dewatering or product concentration.
FilmTec™ LC LE PRO-4040
FilmTec™ LC LE PRO-4040 Elements deliver high quality water at low pressure at harsh water conditions, using DuPont’s innovative, proprietary technology for low energy commercial applications. DuPont’s fully automated element production enables the most consistent products in the industry that minimizes the total cost of ownership of water treatment systems.
FilmTec™ LiNE-XD
FilmTec™ LiNE-XD is a high productivity nanofiltration membrane element for lithium brine purification.
FilmTec™ LiNE-XD HP
FilmTec™ LiNE-XD HP is a high pressure, high productivity nanofiltration membrane element for lithium brine purification.
FilmTec™ NF-3838/30-FF
FilmTec™ NF-3838/30-FF Elements can be used by food and dairy processors for a variety of desalting, purification, and other separations. This element contains an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing a variable degree of monovalent salts depending upon the composition of the process stream.
FilmTec™ NF-3840/30-FF
FilmTec™ NF-3840/30-FF Elements can be used by food and dairy processors for a variety of desalting, purification and other separations. This element contains an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing a variable degree of monovalent salts depending upon the composition of the process stream.
FilmTec™ NF245-3838/30-FF
FilmTec™ NF245-3838/30-FF Elements can be used by food and dairy processors for a variety of desalting, purification, and other separations. This element contains an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing a variable degree of monovalent salts depending upon the composition of the process stream.
FilmTec™ NF245-3840/30-FF
FilmTec™ NF245-3840/30-FF Elements can be used by food and dairy processors for a variety of desalting, purification, and other separations. This element contains an improved nanofiltration membrane sheet that rejects organics with a molecular weight above 300 amu, while passing a variable degree of monovalent salts depending upon the composition of the process stream.
FilmTec™ NF270-400/34i
FilmTec™ NF270-400/34i Elements are ideal for utility managers and operators dealing with surface and groundwater and seeking a technology that removes a high percentage of total organic carbon (TOC) and trihalomethane (THM) precursors while having a medium to high salt passage and medium hardness passage.
FilmTec™ NF270-4040
FilmTec™ NF270-4040 Elements are ideal for removing a high percentage of TOC and THM precursors with medium to high salt passage and medium hardness passage in commercial systems. The NF270 nanofiltration membrane is an ideal choice for surface water and ground water where good organic removal is desired with partial softening. FilmTec NF270-4040 elements are tape-wrapped.
FilmTec™ NF270-440
FilmTec™ NF270-440 presents an ideal solution for utility managers and operators dealing with surface and groundwater and seeking a technology that removes a high percentage of total organic carbon (TOC) and trihalomethane (THM) precursors while having a medium to high salt passage and medium hardness passage.
FilmTec™ NF90-400/34i
FilmTec™ NF90-400/34i Elements are ideal for utility managers and operators looking for a technology that delivers high quality permeate water while removing specific contaminants such as salts, nitrates, iron, and organic compounds.
FilmTec™ NF90-4040
FilmTec™ NF90-4040 Elements provide high productivity performance while removing a high percentage of salts, nitrate, iron and organic compounds such as pesticides, herbicides and THM precursors. The low net driving pressure NF90 membrane allows the removal of these compounds at low operating pressures.
FilmTec™ Prime RO
With energy consumption savings and improved permeate quality, FilmTec™ Prime RO offers high performance with unparalleled sustainability credentials.
FilmTec™ RO-3838/30-FF
FilmTec™ RO-3838/30-FF Elements contain sanitary, high-rejection reverse osmosis membrane that has been successfully used to process a wide range of food, beverage, and dairy streams. These elements are especially effective in dewatering and product concentration. The full-fit configuration is optimal for cleaning and minimizing "dead spaces.
FilmTec™ RO-3840/30-FF
FilmTec™ RO-3840/30-FF Elements contain sanitary, high-rejection reverse osmosis membrane that has been successfully used to process a wide range of food, beverage, and dairy streams. These elements are especially effective in dewatering and product concentration. The full-fit configuration is optimal for cleaning and minimizing "dead spaces.
FilmTec™ RO-390-FF
FilmTec™ RO-390-FF Elements are the premier membrane for evaporator condensate polishing. With more active area than competitive elements, FilmTec RO-390-FF can maximize performance and reduce capital cost by requiring the fewest elements for polishing applications.
FilmTec™ RO-4040-FF
FilmTec™ RO-4040-FF elements deliver high flux and outstanding quality water for applications requiring sanitary membrane elements for sterile water for injections, dialysis, and lab water segments.
FilmTec™ RO-4040-FF
FilmTec™ RO-4040-FF Elements elements deliver high flux and outstanding quality water for applications requiring sanitary-grade membrane elements. The full-fit configuration minimizes stagnant areas and is optimal for applications requiring a sanitary design.
FilmTec™ Seamaxx™ 440
FilmTec™ Seamaxx™–440 Elements are the choice for seawater systems operating at low to medium levels of salinity and temperature, as well as for brackish water with relatively high salinity. The element’s flowrate is significantly above flowrates of any other SWRO element currently available in the market. This extraordinary high element productivity leads to substantial savings, primarily in energy consumption when compared to conventional low-energy SWRO products.
FilmTec™ Seamaxx™ 440i
FilmTec™ Seamaxx™–440i Elements are the choice for seawater systems operating at low to medium levels of salinity and temperature, as well as for brackish water with relatively high salinity. The element’s flowrate is significantly above flowrates of any other SWRO element currently available in the market. This extraordinary high element productivity leads to substantial savings, primarily in energy consumption when compared to conventional low-energy SWRO products.
FilmTec™ SG30-400/34i
FilmTec™ Specialty 8" Elements have been developed through industry-leading research to meet special application requirements such as ultrapure water for the fabrication of microelectronics, the removal of sulfate from injection water on offshore oil platforms, heat-sanitizable products for use in medical applications, and the concentration of maple sap.
FilmTec™ SG30LE PRO-440
FilmTec™ SG30LE PRO-440 is a semiconductor grade brackish water reverse osmosis element with high cleanliness.
FilmTec™ SG30LE-440i
FilmTec™ SG30LE-440i Semiconductor-Grade Reverse Osmosis Elements have been developed to meet the requirements of higher overall rejection, higher rejection of lower molecular weight organic compounds and silica, and an accelerated TOC rinse down profile.
FilmTec™ Specialty Membranes HTNF-4040/34 and HTNF-8040/34 High Temperature Nanofiltration Elements
FilmTec™ Specialty Membranes HTNF-8040/34 and HTNF-4040/34 High Temperature Nanofiltration Elements offer a distinct combination of features. It allows up to 70°C continuous operating temperature capability thus reducing the size of cooling and heating systems.
FilmTec™ SR90
FilmTec™ SR90 Elements contain a nanofiltration membrane that is designed to selectively remove sulfate from seawater used for waterflood injection operations in offshore oil production, helping to prevent barium and strontium sulfate scale precipitation and to control/mitigate souring in reservoirs containing barium and strontium.
FilmTec™ SW30-2514
FilmTec™ SW30-2514 Elements have one of the highest flow rates available to meet the water demands of both sea-based and land-based desalinators. FilmTec™ SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expenses.
FilmTec™ SW30-2521
FilmTec™ SW30-2521 Elements have one of the highest flow rates available to meet the water demands of both sea-based and land-based desalinators. FilmTec™ SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expenses.
FilmTec™ SW30-2540
FilmTec™ SW30-2540 Elements have one of the highest flow rates available to meet the water demands of both sea-based and land-based desalinators. FilmTec™ SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expenses.
FilmTec™ SW30-4021
FilmTec™ SW30-4021 Elements have one of the highest flow rates available to provide the highest productivity while maintaining excellent salt rejection to meet the water demands of both sea-based and land-based desalinators. FilmTec™ SW30-4021 elements may also be operated at lower pressure to reduce pump size, cost, and operating expenses.
FilmTec™ SW30-4040
FilmTec™ SW30-4040 Elements have one of the highest flow rates available to provide the highest productivity while maintaining excellent salt rejection to meet the water demands of both sea-based and land-based desalinators. FilmTec SW30-4040 elements may also be operated at lower pressure to reduce pump size, cost, and operating expenses.
FilmTec™ SW30HR-380 Dry
FilmTec™ SW30HR-380 Elements are a premium-grade seawater reverse osmosis element featuring both high active area and high salt rejection to offer the best long-term economics for seawater desalination systems.
FilmTec™ SW30HR-380 Wet
FilmTec™ SW30HR-380 Elements are a premium-grade seawater reverse osmosis element featuring both high active area and high salt rejection to offer the best long-term economics for seawater desalination systems.
FilmTec™ SW30HRLE-370/34 Dry
FilmTec™ SW30HRLE-370/34 Elements are durable, high-rejection, high-productivity seawater elements for use in high-fouling or challenging feedwater conditions, helping to support smooth operations and low cost of water.
FilmTec™ SW30HRLE-370/34 Wet
FilmTec™ SW30HRLE-370/34 Wet Elements are durable, high-rejection, high-productivity seawater elements for use in high-fouling or challenging feedwater conditions, helping to support smooth operations and low cost of water.
FilmTec™ SW30HRLE-370/34i Dry
FilmTec™ SW30HRLE-370/34i Elements are durable, high-rejection, high-productivity seawater elements for use in high-fouling or challenging feedwater conditions, helping to support smooth operations and low cost of water.
FilmTec™ SW30HRLE-370/34i Wet
FilmTec™ SW30HRLE-370/34i Wet Elements are durable, high-rejection, high-productivity seawater elements for use in high-fouling or challenging feedwater conditions, helping to support smooth operations and low cost of water.
FilmTec™ SW30HRLE-400 Dry
Starting in 2020, DuPont Water Solutions has produced and supplied our customers dry seawater reverse osmosis FilmTec™ elements. As an industry leader, we will be the first supplier to offer dry-tested SWRO elements.
FilmTec™ SW30HRLE-400 Wet
FilmTec™ SW30HRLE-400 Wet Element offers rejection and low total cost of water for seawater desalination. The FilmTec SW30HRLE-400 delivers high performance over the operating lifetime without the use of oxidative post-treatments and provides high NaCl and boron rejection to help meet World Health Organization (WHO) and other drinking water standards.
FilmTec™ SW30HRLE-440 Dry
Starting in 2020, DuPont Water Solutions has produced and supplied our customers dry seawater reverse osmosis FilmTec™ elements. As an industry leader, we will be the first supplier to offer dry-tested SWRO elements.
FilmTec™ SW30HRLE-440 Wet
FilmTec™ SW30HRLE–440 Elements offer sustainable lower life-cycle cost for medium- and high-salinity feedwater by combining high rejection and low energy performance with the highest active area and a thick feed spacer.
FilmTec™ SW30HRLE-440i Dry
Starting in 2020, DuPont Water Solutions has produced and supplied our customers dry seawater reverse osmosis FilmTec™ elements. As an industry leader, we will be the first supplier to offer dry-tested SWRO elements.
FilmTec™ SW30HRLE-440i Wet
FilmTec™ SW30HRLE-440i Elements offers sustainable lower lifecycle cost for medium- and high-salinity feedwaters with high stabilized salt rejection of 99.80% and high boron rejection. The highest guaranteed active area of 440 ft2 (41 m2) permits lowest system cost by maximizing productivity and enables accurate and predicable system design.
FilmTec™ SW30XFR-400/34 Dry
FilmTec™ SW30XFR-400/34 Dry Elements are designed specifically to handle biofouling in seawater desalination plants. Elements are equipped with advanced fouling-resistant and cleanability features, helping plants reduce the number of chemical cleanings, while maintain high rejection and low energy.
FilmTec™ SW30XFR-400/34 Wet
FilmTec™ SW30XFR-400/34 Wet Elements are designed specifically to handle biofouling in seawater desalination plants. Elements are equipped with advanced fouling-resistant and cleanability features, helping plants reduce the number of chemical cleanings, while maintain high rejection and low energy.
FilmTec™ SW30XFR-400/34i Dry
FilmTec™ SW30XFR-400/34i Dry Elements are designed specifically to handle biofouling in seawater desalination plants. Elements are equipped with advanced fouling-resistant and cleanability features, helping plants reduce the number of chemical cleanings, while maintain high rejection and low energy.
FilmTec™ SW30XFR-400/34i Wet
FilmTec™ SW30XFR-400/34i Wet Elements are designed specifically to handle biofouling in seawater desalination plants. Elements are equipped with advanced fouling-resistant and cleanability features, helping plants reduce the number of chemical cleanings, while maintain high rejection and low energy.
FilmTec™ SW30XHR-400
FilmTec™ SW30XHR–400 Elements are the highest rejection seawater RO elements in the FilmTec™ Element portfolio, enabling stringent water quality requirements to be met with single-pass seawater systems in most situations.
FilmTec™ SW30XHR-440
FilmTec™ SW30XHR–440 elements are the highest rejection seawater RO elements in the FilmTec™ element portfolio, enabling stringent water quality requirements to be met reliably with single-pass seawater systems in most situations.
FilmTec™ SW30XHR-440i
FilmTec™ SW30XHR-440i Elements are the highest rejection seawater RO element in the FilmTec element portfolio, enabling stringent water quality requirements to be met reliably with single-pass seawater systems in most situations. In addition, the combination of high active area and thick feed spacer results in higher productivity and lower cleaning frequency, which enable sustainable lower lifecycle cost.
FilmTec™ SW30XLE-440 Dry
FilmTec™ SW30XLE-440 Dry Elements offer medium-salinity and medium-temperature feedwaters an advanced combination of high productivity and high rejection through extra-low energy consumption and single-pass design.
FilmTec™ SW30XLE-440 Wet
FilmTec™ SW30XLE–440 Wet Elements offer medium-salinity and medium-temperature feedwaters an advanced combination of high productivity and high rejection through extra-low energy consumption and single-pass design.
FilmTec™ SW30XLE-440i Dry
FilmTec™ SW30XLE-440i Dry Elements offer medium salinity and medium temperature feed waters an advanced combination of high productivity and high rejection through extra-low energy consumption and single-pass design. It is also an ideal choice for two-pass seawater designs or high salinity brackish water applications.
FilmTec™ SW30XLE-440i Wet
FilmTec™ SW30XLE-440i Wet Elements offer medium salinity and medium temperature feed waters an advanced combination of high productivity and high rejection through extra-low energy consumption and single-pass design. It is also an ideal choice for two-pass seawater designs or high salinity brackish water applications.
FilmTec™ SWBR 200
Seawater brine concentrator reverse osmosis membrane element allowing to purify and concentrate sodium chloride brine from seawater reverse osmosis desalination plants.
FilmTec™ SWBR-100i
FilmTec™ SWBR-100i Seawater Ion Selective Nanofiltration Membrane offers high divalent rejection and low energy use.
FilmTec™ SWBR-150i
FilmTec™ SWBR-150i Seawater Ion Selective Nanofiltration Membrane for low energy consumption.
FilmTec™ TW30 PRO-4040
FilmTec™ TW30 PRO-4040 Elements are the industry standard for reliable operation and production of the highest quality water in commercial applications.
FilmTec™ TW30-1812-50HR
FilmTec™ Tap Water Reverse Osmosis Elements feature advanced membrane technology and offer outstanding reliability and consistency. Our automated fabrication process allows precise production of every element to tight, pre-defined specifications, helping customers develop and maintain brand recognition along with a reputation for building systems that reliably provide low-impurity drinking water.
FilmTec™ TW30-2514
FilmTec™ TW30-2514 Elements produce high quality water for small commercial systems. FilmTec TW30-2514 elements are tape-wrapped. In addition to high quality water and low energy costs, FilmTec membranes also deliver savings by providing long lasting and reliable performance.
FilmTec™ TW30-2521
FilmTec™ TW30-2521 Elements produce high quality water for small commercial systems. FilmTec TW30-2521 elements are tape-wrapped. In addition to high quality water and low energy costs, FilmTec membranes also deliver savings by providing long lasting and reliable performance.
FilmTec™ TW30-4014
FilmTec™ TW30-4014 Reverse Osmosis (RO) Elements offer high quality water for small commercial systems. FilmTec TW30-4014 elements are tape-wrapped In addition to high quality water and low energy costs, FilmTec membranes also deliver savings by providing long lasting and reliable performance.
FilmTec™ TW30HP-4611
FilmTec™ TW30HP-4611 Elements are 4.6-inch diameter reverse osmosis elements offering high quality water for sanitary applications, using the high performance TW30HP membrane, which offers excellent permeate flow and salt rejection. These elements are made with the same high quality materials of construction as our larger FilmTec™elements used in municipal and industrial systems.
FilmTec™ TW30HP-4619
FILMTEC™ TW30HP-4619 Elements are 4.6-inch diameter reverse osmosis elements offering high quality water for sanitary applications, using the high performance TW30HP membrane, which offers excellent permeate flow and salt rejection. These elements are made with the same high quality materials of construction as our larger FILMTEC elements used in municipal and industrial systems.
FilmTec™ XLE PRO-4040
FilmTec™ XLE PRO-4040 Elements offer better system performance and economics for small commercial systems by operating at very low applied pressure.
FilmTec™ XLE-440
FilmTec™ XLE-440 Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment and seeking high-quality permeate water at low operating costs.
FilmTec™ XLE-440i
FilmTec™ XLE-440i Elements are ideal for reverse osmosis plant managers and operators dealing with controlled pre-treatment and seeking high-quality permeate water at low operating costs.