Duplex Water Softener with Clack WS3 Metered Digital Controller 3" (40.0 - 56.0m3/hr)

Product Description

3" in/out connections. Interconnecting pipework not included.

Duplex water softeners consist of two vessels filled with softening resin. In normal use one vessel is online (duty) while the other is off line (standby).

Systems range in size from 500 litres per hour to 56,000 litres per hour

All systems come with vessels, valves, resins, brine tank and fittings.

Duplex softeners normally regenerate when the duty vessel becomes saturated with scale. The standby tank immediately goes online while the previous online tank regenerates. When sizing a duplex system softeners are normally sized to go 12 hours between needing to regenerate.

This softener is supplied partially assembled for shipping. Some assembly will be required.





**sizes may vary dependent on components used and should only be used as a guide.

THIS KIT MUST BE PARTIALLY ASSEMBLED AND PROGRAMMED IN OUR WORK SHOP - CONTACT US FOR LEAD TIME

General conditions for installation

Connection IN & OUT: 3"
Drain connection(*): 3"
Electrical rating: 230V 50Hz 12V Transformer
Max power rating: 24 W
Minimum inlet pressure: 200 kPa (2 bar)
Maximum inlet pressure: 700 kPa (7 bar)
Vacuum: no allowance
Average pressure loss (**): 100 kPa (1 bar)
Min-max water temperature: 5-43°C

It is always recommended to install a 25 micron cartridge filter before a softener.

Resin

Type: Strong acid cation resin - softening ,food grade quality
Life span: 15 years under normal circumstances

Ion exchange ( for average salt consumption of 150 g/L )





Flow Rate



The interval between regenerations should not be more than 4 days, to prevent bacteria growth. There is the option to set a day override regeneration.