My Cart

Items:  items
Value: 

Simplex Water Softener with Clack WS3 CI Digital METER Controller, 3"

Simplex Water Softener with Clack WS3 CI Digital METER Controller, 3
Simplex Water Softener with Clack WS3 CI Digital METER Controller, 3" - view 1Simplex Water Softener with Clack WS3 CI Digital METER Controller, 3" - view 2Simplex Water Softener with Clack WS3 CI Digital METER Controller, 3" - view 3

Ref: 4302048131

3" in/out connections

These Simplex water softeners use high quality vessels and superior softening resin. The units are controlled with a Clack WS3 CI multiport valve on top of the vessel allowing automatic regeneration.
Systems can regenerate after a given time (time) or quantity of water (metered).

Systems range in size from 500 l/ per hour to 50,000 litres per hour.

All systems come with vessel, valve, resin, brine tank and all fittings. In commercial softeners the brine tank sits next to the resin filled resin rather than the vessel sitting inside the brine tank. The very reliable multiport valve can record system information such as average and maximum flow rates.

Timed controlled models regenerate automatically every 2 or 3 days. Meter controlled versions monitor the amount of water used to regenerate when it needs to.
This softener is supplied partailly assembled for shipping. Some assembly will be required. All components and instructions will be supplied.

oops

oops

* Estimated weight of the system without water or salt.
** Sizes may vary dependant on components used and should only be used as a guide.

3" in/out connections

These Simplex water softeners use high quality vessels and superior softening resin. The units are controlled with a Clack WS3 CI multiport valve on top of the vessel allowing automatic regeneration.
Systems can regenerate after a given time (time) or quantity of water (metered).

Systems range in size from 500 l/ per hour to 50,000 litres per hour.

All systems come with vessel, valve, resin, brine tank and all fittings. In commercial softeners the brine tank sits next to the resin filled resin rather than the vessel sitting inside the brine tank. The very reliable multiport valve can record system information such as average and maximum flow rates.

Timed controlled models regenerate automatically every 2 or 3 days. Meter controlled versions monitor the amount of water used to regenerate when it needs to.
This softener is supplied partailly assembled for shipping. Some assembly will be required. All components and instructions will be supplied.

oops

oops

* Estimated weight of the system without water or salt.
** Sizes may vary dependant on components used and should only be used as a guide.
General conditions for installation

Connection IN & OUT: 3"
Drain connection(*): 3"
Electrical rating: 230V 50Hz 24V Transformer
Max power rating: 24W
Minimum inlet pressure: 200 kPa (2 bar)
Maximum inlet pressure: 700 kPa (6 bar)
Vacuum: no allowance
Average pressure loss (**): 100 kPa (1 bar)
Min-max water temperature: 43°C

Resin

Type: Strong acid cation resin - softening ,food grade quality
Life span: 15 years under normal circumstances

Ion exchange ( for average salt consumption of 150 g/L )

oops

Flow Rate

oops

Remarks
The interval between regenerations should not be more than 4 days, to prevent bacteria growth.

Recently Viewed