My Cart

Items:  items
Value: 

Siata V360 Simplex Water Softener, Time Clock, 20.0 - 40.0m³/h, 2" / 3"

Siata V360 Simplex Water Softener, Time Clock, 20.0 - 40.0m/h, 2

Ref: SIS360SFEC

2" / 3" in/out connections

These Simplex water softeners use high quality vessels and superior softening resin. The units are controlled with a Siata V360 multiport valve on top of the vessel allowing automatic regeneration.

Systems can regenerate after a given time (time) or quantity of water (metered).

Systems range in size from 20,000 liters per hour to 40,000 litres per hour.

All systems come with vessel, valve, resin, brine tank and all fittings. In commercial softeners the brine tank sits next to the resin filled resin rather than the vessel sitting inside the brine tank.

Timed controlled models regenerate automatically every 2 or 3 days. Meter controlled versions monitor the amount of water used to regenerate when it needs to.

This softener is supplied partailly assembled for shipping. Some assembly will be required. All components and instructions will be supplied.

oops

oops

General conditions for installation

Connection Inlet & Outlet : 2” BSP (500 - 700 Litre), 2.5" (750 Litre High Flow), 3" (850 - 1250 Litre)
Drain Connection * : 1” Hose barb
Electrical Rating : 230-12V / 50 Hz
Power Rating : 4.6 VA
Minimum Inlet Pressure : 200 kPa ( 2 Bar )
Maximum Inlet Pressure : 600 kPa ( 7 Bar )
Vacuum : Not permitted
Average Pressure Loss ** : 100 kPa ( 1 Bar )
Maximum Water Temperature : 43ºC
* Open drain required
** It is recomended that a 20µm pre filter cartridge be installed prior to the inlet of the water softener

2" / 3" in/out connections

These Simplex water softeners use high quality vessels and superior softening resin. The units are controlled with a Siata V360 multiport valve on top of the vessel allowing automatic regeneration.

Systems can regenerate after a given time (time) or quantity of water (metered).

Systems range in size from 20,000 liters per hour to 40,000 litres per hour.

All systems come with vessel, valve, resin, brine tank and all fittings. In commercial softeners the brine tank sits next to the resin filled resin rather than the vessel sitting inside the brine tank.

Timed controlled models regenerate automatically every 2 or 3 days. Meter controlled versions monitor the amount of water used to regenerate when it needs to.

This softener is supplied partailly assembled for shipping. Some assembly will be required. All components and instructions will be supplied.

oops

oops

General conditions for installation

Connection Inlet & Outlet : 2” BSP (500 - 700 Litre), 2.5" (750 Litre High Flow), 3" (850 - 1250 Litre)
Drain Connection * : 1” Hose barb
Electrical Rating : 230-12V / 50 Hz
Power Rating : 4.6 VA
Minimum Inlet Pressure : 200 kPa ( 2 Bar )
Maximum Inlet Pressure : 600 kPa ( 7 Bar )
Vacuum : Not permitted
Average Pressure Loss ** : 100 kPa ( 1 Bar )
Maximum Water Temperature : 43ºC
* Open drain required
** It is recomended that a 20µm pre filter cartridge be installed prior to the inlet of the water softener
oops

Recently Viewed