The PCC series cartridges contain food-grade hexametaphosphate, which prevents scale and rust build-up.
This type of treatment is recommended for use with ice machines, coffee and vending machines, food service equipment, water heaters, air conditioning systems and many other types of water processing equipment.
To best meet your needs, cartridges are available in three feeder sizes and all materials are FDA grade. Highly effective at treating scale, corrosion and iron problems, these cartridges last for up to six months at various flow rates and feed concentrations.
The PCC-106 is an insert element that is placed in the center core of the cartridge. It is designed for use with standard 10" and 20" radial flow, sediment and carbon block filter cartridges. For a carbon and phosphate combined cartridge see TS-GAC's.
Scale Hardness particles are kept separated so they cannot precipitate and form deposits when heated.
Corrosion A protective coating is formed on all metal surfaces, safeguarding against acidity/alkalinity, hardness, chloride and other factors which affect the corrosion of water equipment and pipes; pH range 6.5-9.0
Iron Dissolved iron, up to 1 ppm, is kept suspended in solution (sequestered), preventing dissolved iron from precipitating, which would cause staining and discoloration.
Key Product Features
Hardness forming ions are kept separated so they cannot precipitate and form deposits when heated
A protective coating is formed on all metal surfaces, protecting against acidity/alkalinity, hardness, chloride turbulence and other factors that affect the corrosion, which leads to rusting out of water equipment and pipes.
Dissolved iron, up to 1 ppm, is kept suspended in solution (sequestered), decreasing exposure to air and preventing precipitation, which would cause staining, discolouration and undesirable flavour
Maximum Temperature: 38°C
PCC1 (4 - 19 LPM) - suitable for all 3/4" plastic, knife-edge seal vessels PCC106 (4 - 6 LPM) - suitable for insertion into centre core of open end capped vessels. PCC 2-18 (6 - 10 LPM) - suitable for all 10" plastic vessels