Automatic hardness monitoring for continuous control of the soft water downstream of water softening units. Automatic switch off of a downstream reverse osmosis unit in the event of hardness breakthrough. For their operation neither water nor chemicals are consumed.
This is always an advised option but most relevant when:
Pre-treatment is a simplex softener
Inlet hardness is variable
There is limited maintenance and/or no guaranteed operator for salt refillingCharacteristics
- Automatic hardness monitoring unit for continuous control of the soft water downstream of water softening units
- General fault signal as voltage-free change-over contact in the event of hardness breakthrough, e.g. to switch off a downstream reverse osmosis unit
- No need for water or chemicals