For desalination of hardness stabilised drinking water according to drinking water regulations.
Membranes: 8040 x 7
Complete unit skid mounted
RO Digital controller
Salt rejection percentage: min. 97%
Design pressure: 11,5 to 13 bar (depending on type)
Voltage: 3 x 400V / 50 Hz
Digital flow meters
Profinet interface (option)
Incl. concentrate rinsing
Incl. connector kit for manual cleaning set
Prepared for a dosing station with antiscalant
ARA - CONNECTION KIT FOR MANUAL CLEANING UNIT
Ball valves for the connection of a manual cleaning unit e.g. for acid or alkali cleaning of the RO membrane.
Easier to make the cleaning as the pipings do not need to be disconnected first.
Economy of time for making the cleaning
*The units are designed for a maximum TDS of 1,000 mg/l, a water temperature of 15°C, a maximum colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after three years of operation. The permeate recovery depends on the raw water quality and the type of pretreatment.