For desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). Compact system with a small footprint suitable for wall mounting or fixation on the floor.
Typically 97% salt removal and 75% permeate recovery. Fitted with 2 x 4040 membrane.
Dimensions in mm: 400 wide x 340 deep x 1190 height
Special inlet filter with 5 ìm filter cartridge and pressure gauge, high pressure pump, single phase rotary-vane type, high performance modules with composite membranes. Valves and instruments including solenoid inlet valve, feed water pressure switch, permeate and concentrate flow meter, vibration resistant pressure gauges for pump pressure valves for adjustment of permeate and concentrate flow rate.
Wall mounted or free standing
Particularly space-saving (420 x 350 x 1300 mm)
RO 524 controller
Recovery from 75% to 80%
Salt rejection percentage: min. 97%
Working pressure: 12 bar
Voltage: 230 V/50 Hz
Analogue flow meters
CONTROLLERRO 524 microprocessor
two-digit alphanumeric display
conductivity measurement incl. limits
volt free alarm contact
level controlled automatic operation
ARA - CONNECTION KIT FOR MANUAL CLEANING UNIT
Ball valves for the connection of a manual cleaning unit e.g. for acid or alkali cleaning of the RO membrane.
Easier to make the cleaning as the pipings do not need to be disconnected first.
Economy of time for making the cleaning
The units are designed for a maximum TDS of 1,000 mg/l, a water temperature of 15°C, a max. colloidal index of 3 and free permeate outlet. Under these conditions, the unit still reaches design permeate flow after 3 years of operation. The permeate recovery depends on the raw water quality and the type of pre-treatment.