My Cart

Items:  items
Value: 

Herco UO 1500 ND/P, 1500 lph Permeate Staged Reverse Osmosis System 381-139

Herco UO 1500 ND/P, 1500 lph Permeate Staged Reverse Osmosis System  381-139

Ref: 5110010111

For desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). With 4” membrane housings.

Permeate-staged RO System with second permeate stage for treating the permeate of the first stage once again. Thereby a very high quality of permeate is achieved.

membranes: 4040 x 11

FEATURES

• Complete unit skid mounted
• RO 5000 controller
• Recovery from 70% to 71%
• Salt rejection percentage: min. 99,5%
• Working pressure: 14 bar
• Voltage: 230 V/50 Hz (300) / 3 x 400 V/50 Hz (600 - 2000)
• Analogue flow meters
• 2nd permeate stage for high permeate quality
• Two high pressure pumps

ADVANTAGES

• 2nd permeate stage for treating the permeate of the first stage once again
• Salt rejection > 99,5%
• Conductivity < 5ìS/cm
• RO 5000 controller with graphical display

*The unit is designed for a maximum TDS of 1,000 mg/l, a max. SiO2-concentration of 10 mg/l, a water temperature of 15°C, a maximum colloidal index of 3 and no permeate back pressure. Under these conditions, the unit still reaches design permeate flow after three years of operation. The permeate recovery depends on the raw water quality and the type of pre-treatment.

Price: 22,870.00 (27,444.00 Including VAT at 20%)

For desalination of softened drinking water according to drinking water regulations (free chlorine not detectable). With 4” membrane housings.

Permeate-staged RO System with second permeate stage for treating the permeate of the first stage once again. Thereby a very high quality of permeate is achieved.

membranes: 4040 x 11

FEATURES

• Complete unit skid mounted
• RO 5000 controller
• Recovery from 70% to 71%
• Salt rejection percentage: min. 99,5%
• Working pressure: 14 bar
• Voltage: 230 V/50 Hz (300) / 3 x 400 V/50 Hz (600 - 2000)
• Analogue flow meters
• 2nd permeate stage for high permeate quality
• Two high pressure pumps

ADVANTAGES

• 2nd permeate stage for treating the permeate of the first stage once again
• Salt rejection > 99,5%
• Conductivity < 5ìS/cm
• RO 5000 controller with graphical display

*The unit is designed for a maximum TDS of 1,000 mg/l, a max. SiO2-concentration of 10 mg/l, a water temperature of 15°C, a maximum colloidal index of 3 and no permeate back pressure. Under these conditions, the unit still reaches design permeate flow after three years of operation. The permeate recovery depends on the raw water quality and the type of pre-treatment.
oops

Recently Viewed