These kits are built around the very reliable Fleck 5600 and 5600SXT valve heads. The kit includes the valve head, yoke, vessel, quality food grade softener resin, brine tank and all interal parts.
Fleck 5600 SXT Valve
Continuous service flow rate of 20
GPM with a backwash of 7 GPM
Fully adjustable 3 or 5 cycle control for efficient and reliable water treatment system
Super capacitor for keeping time of day during power outage
Time-tested, hydraulically-balanced piston for service and regeneration
Diagnostics for historical valve performance
LCD display alternates between time of day, volume remaining or days until regeneration
Programming stored in memory and will not be lost due to power outages
General Conditions for installation
Connections Inlet & Outlet: 3/4" BSPM Drain Connection*: 1/2" hose Electrical rating: 230-24V / 50 Hz Power Rating: 8 watts Minimum inlet pressure: 2 Bar Maximum inlet pressure: 7 Bar Vacuum: Not permitted Average Pressure Loss**: 1 Bar Maximum water Temperature: 43°C
*Open drain required **It is recommended that a 20 micron pre-cartridge filter be installed prior to the inlet of the water softener
The interval between regenerations should not be more than 4 days, this is to prevent bacteria growth. Regenerations should be more than 8 hours apart.