These kits are built around the Fleck 9500 valve heads. The kit includes the valve heads, yokes, vessels, quality food grade softener resin, brine tank and all interal parts
This softener is supplied partailly assembled for shipping. Some assembly will be required. All components and instructions will be supplied.
Connections Inlet & Outlet: 1.5" BSPF
Drain Connection*: 3/4" BSPF
Electrical rating: 230-24V / 50 Hz
Power Rating: 55 watts
Minimum inlet pressure: 2 Bar
Maximum inlet pressure: 7 Bar
Vacuum: Not permitted
Average Pressure Loss**: 1 Bar
Maximum water Temperature: 43°C
*Open drain required
**It is recommended that a 20 micron pre-cartridge filter be installed prior to the inlet of the water softener
Regeneration will take immediately after reaching the set capacity
The interval between regenerations should not be more than 4 days, this is to prevent bacteria growth.
Regenerations should be more than 8 hours apart.THIS KIT MUST BE PARTIALLY ASSEMBLED AND PROGRAMMED IN OUR WORK SHOP - CONTACT US FOR LEAD TIME