These kits are built around the Fleck 2910 valve heads. The kit includes the valve heads, yokes, vessels, quality food grade softener resin, brine tank and all interal parts.
Fleck 2910 Valve
Lead-free brass valve body for superior strength and durability
Continuous service flow rate of 106 GPM with a backwash of 36 GPM
Backwash capability accommodates softener tanks up to 36" and filter up to 24" in diameter
Fully adjustable 3- or 5-cycle control for efficient and reliable water treatment system
Designed for single or multiple tank systems
Environmental protective cover for water resistance, corrosion resistance, and UV stability
Time-tested, hydraulically-balanced piston for service and regeneration
Rugged-built electromechanical timer designed with heavy duty 3/8" wide plastic gears
General Conditions for Installation
Connections Inlet & Outlet: 2" BSPF Drain Connection*: 3/4" BSPF Electrical rating: 230-24V / 50 Hz Power Rating: 65 watts Minimum inlet pressure: 2 Bar Maximum inlet pressure: 7 Bar Vacuum: Not permitted Average Pressure Loss**: 1 Bar Maximum water Temperature: 43°C
*Open drain required **It is recommended that a 20 micron pre-cartridge filter be installed prior to the inlet of the water softener
Regeneration will take immediately after reaching the set capacity
The interval between regenerations should not be more than 4 days, this is to prevent bacteria growth. Regenerations should be more than 8 hours apart.