Product Description
Universal applicable for automatic monitoring and control of industrial softener plants, suitable for single and double column installations, implementable for a wide range of control valves and pilot valves.
Description
The ES2030CV softener/filter controller is universal applicable for automatic monitoring and control of industrial softener plants and suitable for single and double column installations in alternating, parallel or serial circuits. Universally implementable for a wide range of control valves and pilot valves. Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into non volatile memory and therefore not be affected by power loss.
Features
User operated programming using double row of illuminated LCD display
Display text in English, French, German, Italian, Spanish or Dutch
Simple control utilizing easy to follow symbols
Built-in audio signal for 7 programmed signal indicators
Adaption to user specific requirements by means of options programmable on site
Simple operation by means of a few clear operating symbols
Can be used for various sizes of softener/filter plant
Capacity values programmable from 1 to 65535 m3 E or from 0.01 to 9999.99 m3
Regeneration/rinsing activation by time interval, flow, external switching, real time clock or manual control
Time delayed regeneration/rinsing
Control of quantity dependent flushing
Extensive status report facility using information button
Flush control
regeneration/rinsing time
extra program
filter capacity
total quantity of treated water
current input and outputs status
software version
start time interval
time delayed regeneration/rinsing
service telephone number
input and output programming
Input of service telephone number.
1 programmable input: water meter, regeneration/rinsing stop, regeneration/rinsing start or regeneration/rinsing agent monitoring
1 optional programmable input (IF circuit board) for water meter, regeneration/rinsing stop, regeneration/rinsing start or regeneration/rinsing agent monitoring
Inputs programmable active open or closed
2 optional programmable outputs: extra program, regeneration/rinsing procedure, take-off impulse, signalling or flushing. Output relay programmable active under current or not under current
Secure from power failure as all data is stored long-term without battery
Real time clock with battery back-up
SD Card holder for software updates
Efficient micro controller with watchdog, illegal operation code and cycle monitoring
Safeguarded from EMC by galvanic separation between microcontroller and in- and output circuits and also by additional interference suppression filter
Available for wall-mounting
Available (input /output) : 24/24VAC, 115/115VAC, 230/230VAC, 115/24VAC, 230/24VAC