PROFINE® ARSENIC LINEPROFINE® ARSENIC
removes arsenic concetration. Selective arsenic resin and last phase of filtration obtained with Profine® Carbon Block technology mixed with silver ions with a filtration of 0.5 microns for bacteriostatic action.
Use for the removal of arsenic from drinking water with a concentration of 50 µg/l.
REMOVES BAD ODOURS AND OFF-TASTES
REDUCE ARSENIC CONCENTRATION MICROFILTRATION AND ARSENIC REMOVAL IN DRINKING WATERBIG PROFINE® ARSENIC
is part of a wide range of Profine® products tested and designed to meet all needs. It is ideal in professional use where large quantities of refined water are necessary.
The cartridge must be installed in vertical position.
Use only in-out 3/8 female connection.CONDITIONING VALVE
The process of activating the water filters consists of an initial start-up phase called Conditioning. Conditioning is an initial filter rinsing process required to ensure ideal operating conditions for the filter. This initial rinse guarantees the complete cleansing of all the inner filtering devices and the circuit itself. Conditioning should only be carried out during the first cartridge activation. This operation may take from a few seconds to several minutes. We also recommend doing it when the filter has been idle for long periods. You can find the indications for how many litres to use for the correct conditioning in the product technical data sheets.
We recommend replacing the cartridge at the end of its nominal range, or if the output flow ate is too slow. Its better that you replace the cartridge within 365 days of its installation. Before removing the cartridge, close the upstream water inlet and eliminate the pressure in the circuit by opening the downstream tap. To activate the cartridge correctly, open the inlet valve and supply water for at least five minutes before drinking it.