A range of high specification variable speed cold water booster sets with two pumps. The sets feature the IMAT variable speed controller with either our stainless steel MXH series or MXV series multi-stage pumpsPumps:
MXH all stainless steel horizontal multi-stage centrifugal pumps (WRAs Approved) Motors:
Aluminium 2-pole (2900 rpm) induction motors, 400/3/50, class F insulation, IP54 and IP55 protection. System:
One piece stainless steel manifolds, and brass fittings with WRAs approved valves, WRAs approved GWS accumulator all mounted on a mild steel powder coated baseplate, fully wired and tested. Operating Conditions:
Fluid: Clean Cold Water.
Control: IMAT variable speed via Pressure Transducer, Differential Transducer or Temperature Transducer
Fluid Temp: Max 25 Deg.C.
Max Press: 10 bar Operation Pressure
Air Amb: Max 40 Deg.C
Rated: Continuous ServiceFeaturesControl Panel
I-MAT is equipped with a control panel that allows to carry out the set-up of the system and to monitor allsystem parameters.
The control panel is inside a IP55 enclosure which is possible to rotate and install in remote positions.
It is possible use the control panel in remote positions by means a cable with M12 connectors (standard cable).
The LCD custom display gives an easy overview of the system situation and of the operating parameters.
The icons on the top and below the display area explain in which way i-MAT is working and if there are some problems on the system.
The 2 scroll buttons are used to scroll the different operating parameters that i-MAT can show. At the same time you can use the 2 scroll buttons to move in the set up menu and to change the different options.
The 4 set-up buttons are created to enter and to move on the set-up menus and to start and to stop the pump. The symbols help to understand the function of each button. With these 4 buttons and the 2 scroll buttons you can manage all the set-up and operating parameters without the use of another control panel or computers.