My Cart

Items:  items
Value: 

10" x 44" CR200 Crystal Right Simplex System with Evolve Valve 1.5 m³/hr

10

Ref: 5002082016

The Evolve valve has a built in chlorine generator which on each regeneration produces up to 20 ppm chlorine to disinfect the media and stop smelly bacteria build up. The result is a system also reduces iron, manganese, hardness and ammonia. If KDF is added hydrogen sulphide can also be removed.

Crystal Right™ works by an ion exchange process which removes iron, manganese and hardness. The minimum pH requirement for CR200 is 7.0. CR200 has the highest capacity from removing hardness, iron amd manganese. Crystal Right works at its best on clear water, i.e. when the iron/manganese are in a dissolved form. Crystal Right will also remove hardness with no extra treatment. Ammonia, lead, hydrogen sulphide and copper can also be reduced. The media bed can be sanitised with chlorine from time to time.The regeneration process is exactly the same as that used in a water softener and requires regeneration with salt (sodium chloride). CR200 is used where the pH is between7 and 11. Crystal Right CR200 has a number of advantages over conventional systems in that iron/manganese removal and softening can all be addressed in a single process and at lower pHs.

Requirements:
Combination of Manganese & Iron: Up to 15 PPM
Hydrogen Sulfide (H2S): Less than 0.5 PPM
Hardness as CaCo3: >50 ppm minimum needed
Minimum TDS: 80 PPM
No aluminium should be present in feed water.
pH Range: 7-11
Iron must be in soluble ferrous form*

*Water containing ferrous iron is clear and colorless because the iron is completely dissolved.

Crystal Right CR200 should be concidered where iron and or manganese and hardness need to be tackled or where higher backwashing rates can't be acheived as would be needed with Filox or Birm.

oops

THIS KIT MUST BE PARTIALLY ASSEMBLED AND PROGRAMMED IN OUR WORK SHOP - CONTACT US FOR LEAD TIME

Price: 947.60 (1,137.12 Including VAT at 20%)

The Evolve valve has a built in chlorine generator which on each regeneration produces up to 20 ppm chlorine to disinfect the media and stop smelly bacteria build up. The result is a system also reduces iron, manganese, hardness and ammonia. If KDF is added hydrogen sulphide can also be removed.

Crystal Right™ works by an ion exchange process which removes iron, manganese and hardness. The minimum pH requirement for CR200 is 7.0. CR200 has the highest capacity from removing hardness, iron amd manganese. Crystal Right works at its best on clear water, i.e. when the iron/manganese are in a dissolved form. Crystal Right will also remove hardness with no extra treatment. Ammonia, lead, hydrogen sulphide and copper can also be reduced. The media bed can be sanitised with chlorine from time to time.The regeneration process is exactly the same as that used in a water softener and requires regeneration with salt (sodium chloride). CR200 is used where the pH is between7 and 11. Crystal Right CR200 has a number of advantages over conventional systems in that iron/manganese removal and softening can all be addressed in a single process and at lower pHs.

Requirements:
Combination of Manganese & Iron: Up to 15 PPM
Hydrogen Sulfide (H2S): Less than 0.5 PPM
Hardness as CaCo3: >50 ppm minimum needed
Minimum TDS: 80 PPM
No aluminium should be present in feed water.
pH Range: 7-11
Iron must be in soluble ferrous form*

*Water containing ferrous iron is clear and colorless because the iron is completely dissolved.

Crystal Right CR200 should be concidered where iron and or manganese and hardness need to be tackled or where higher backwashing rates can't be acheived as would be needed with Filox or Birm.

oops

THIS KIT MUST BE PARTIALLY ASSEMBLED AND PROGRAMMED IN OUR WORK SHOP - CONTACT US FOR LEAD TIME

Recently Viewed